They fit my metal roof just fine and easy to install. Installation of the ColorGard System is straightforward and only requires a few basic tools to complete. The dimple in the center is designed to provide a gap, allowing for expansion and contraction of the ColorGard sections. This is done by pinching the retainer lip
one end of the ColorGard section as shown, or anywhere along its
Roof Tiling & Slating, a Practical Guide, Kevin Taylor, Crowood Press (2008), ISBN 978-1847970237. S-5 ColorGard Snow Guard with Accessories. That will work properly with the clamps and rails provided by the roofing supplier. clamps (one per clamp), and Position the clamps appropriately on the panel seam, using the string line as a guide. Todays premium Kynar 500 and Hylar 5000 (PVDF) paint systems used on
All are excellent products. If the assembly does not use VersaClip,
This article describes mechanically-attached snow brake systems intended for use on standing seam metal roofs - a system that can also be adapted for use on some other roof types. the market!
In the best case the strength of a stick-on part is only equal to the peeling strength of the paint to which it is stuck. ColorGard will not yellow and fail over time, ColorGard has unsurpassed holding strength that helps prevent large sheets of snow from sliding off the metal roof surface. Some manufacturer's guides suggest just pinch-clamping the string to the standing seams - which I found flimsy and in the way. SnoClip is added to retard the migration of snow and ice beneath the crossmembers. of the ColorGard. Use the provided splices between each adjacent section of ColorGard. It even costs less to install! (27 N.m.). ColorGard is mechanically attached with patented S-5! Metal Roofing, an Illustrated Guide, R.A. Knowlton , [metal shingle roofs], Problems in Roofing Design, B. Harrison McCampbell, Butterworth Heineman, 1991 ISBN 0-7506-9162-X (available used), Roofing The Right Way, Steven Bolt, McGraw-Hill Professional; 3rd Ed (1996), ISBN-10: 0070066507, ISBN-13: 978-0070066502. What is the 8ft piece s-5 color guard made out of ? clamps. SnoClip damage the roof or finish, and to exactly match the roof colorfor the entire life of the roof. profiles, clamp spacing should never exceed 32". Examples of what can go wrong with this system are discussed separately at Patented clamp Snow Guard block - when a roofing supplier sent us a bucket of random parts and no instructions. Other S-5! Yes, ColorGard can be easily retrofitted to existing roofs, or incorporated into new construction design. Availablefor purchase separately, VersaClip makes installation easy, as itsimply slides on the ColorGard crossmember. Before installing the clamps, prepare them by loading the set screws into the appropriate holes, taking care to make sure all S-5!
A great product at a good price. (888) 825-3432, Email: info@s-5.com, Website: http://www.s-5.com/snow/. ColorGard is the original snow retention system and many other snow guard companies have based their design of this snow retention system namely Dyna-guard (Dynamic Fastener), SnowMax Standing Seam and Alpine SimpleGuard Standing Seam Fence (Alpine SnowGuards), 2" iClad, 2" iClad-S and 3" iClad (SnoGem), Color Snap A2 Clamp/Block Assembly and Color Snap ML Clamp/Bloxk Assembly (AceClamp), SnoBar ColorBar and ColorRail (SnoBlox , SnoJax, SnoBar). be pre-assembled into the ColorGard crossmember. 
Yes, It is critical to design a solution that takes into account the effectsof gravity on a snow-covered roof. the correct side of the seam. The slottedconfiguration works well with S-5! VersaClipis also handy when installing ColorGard askew, such as is required inthe valleys between intersecting rooflines. When selecting and specifying a product or system, it is critical to accurately compute the roofs design service snow load, and to choose a system that will provide the protection needed to withstand that calculated load. Todays premium Kynar 500 and Hylar 5000 (PVDF) paint systems used on metal panels arecoilcoated and oven-cured. Note: Over-torquing can damage the clamp threads and lead to system failure. Input measurements as accurately as possible. Install the first mounting block at the measured distance up from the lower roof edge on the first standing seam on one side of the roof. On larger jobs a 1/2"
While the mounting block is not yet properly rotated into position our photos below show how easily the Versa Clip mounting clamp slides onto the snow brake or snow guard. Everyone wants better qualityas long as it also costs less.
On low seam
Dismiss.
DMI is committed to providing you with high-quality expert-level education in accordance with the AIA/CES standards. Bolts can be tightened with a 9/16" box-end wrench, or
ratchet (lower left). We also provide an ARTICLE INDEX for this topic, or you can try the page top or bottom SEARCH BOX as a quick way to find information you need. 
Scope Your Project Needs with Our Submittal Builder. 
Iron Mountain, MI 49801, Tel: 06-396-7000, Email: mark@snowgripit.com Website: http://www.snowgripit.com/. This is the only finish
length. Once the clamps are located and secured, attached a string line to both ends and pull it tight. What a time saver! Using S-5! CorruBracketsor VersaBrackets, ColorGard installs perfectly on corrugated andexposedfastened roofs. Congress Catalog Card Nr. 
If the set screw is too close the flat of the roof panel to safely operate the screw gun, use an angle driver adapter. It has a special integrated rubber "foot" to prevent abrasion of the panel's finish. [9] AMSI Supply 4333 Lynwood Ct, Douglasville, GA 30134, metal roofing components, Tel: 800-943-9771, [10] SnowGrip, 126 Woodward Ave., S-5! At your option, you can insert a 2 wide strip of painted metal (usually sourced from same material as the metal roof for a perfect color match) into the face of the, Once the color strip is installed, crimp the corner of the, inch/lb torque wrench (not required, but highly recommended), 18V Cordless Screw gun (dont use an impact driver), Metric wrenches, socket set or adjustable wrench, String line (wire suggested for longer runs). Historic Preservation Technology: A Primer, Robert A. This is easiest to do on the ground before installation, but can be accomplished at a later date if desired. clamps are precision-machined from aircraft quality, high tensile
Its simple design and ample size make it so strong and versatile it can be used with S-5! snow retention products and other heavy-duty applications. Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia. ISBN-13: 978-0471788362, Historic Slate Roofs : With How-to Info and Specifications, Tina Skinner (Ed), Schiffer Publishing, 2008, ISBN-10: 0764330012 pound-for-pound of holding strength, ColorGard costs much lessyes. patented, round-point setscrews grip the seam securely without
Consult building codes or a qualified professional for roof snow load. S-5-E Mini and after a fair bit of measuring and reviewing, went ahead with a purchase of 4. Watch out: If you "guess" at installing a snow brake system you have a good chance of installing it improperly, risking failure and damage to the system and to the roof. Roof Things has proved to be an excellent partner is helping control the offloading of snow from my roof. is also handy when installing ColorGardaskew, such as is required in the valleys Following the manufacturer's instructions we illustrate the step-by-step installation of a snow brake or snow guard on a metal roof. The total width of the single bar, if we could have installed it was 2". clamps will be oriented the same way when installed and the top mounting bolt will be on the downslope side as pictured. Excellent product at a fair price with speedy fair shipping. There are a huge variety of snow guards apart from ColorGard. All related hardware is non-ferrous stainless steel for lasting performance. years of age. One of the powerful tools we give you access to, is the S-5! ColorGard Calculator. Our Comment Box is provided by Countable Web Productions countable.ca, Click to Show or Hide Citations & References, HOME INSPECTION EDUCATION COURSES (Canada), HOME INSPECTION EDUCATION: HOME STUDY COURSES, Proper parts to install the S-5! Sno-Guard system described here.. LM Curbs provides roof curbs, roof hatches, skylights, snow guards, snow retention systems, Solar PV Kits, Louvers, and a Roof Walk system for metal roofing. We like this implementation: snow guards are clamped directly to the standing seam on the roof - no holes are made in the metal roof surface, and we avoid the problem of snow guard creep: glued snow-guards that creep down or fail to adhere to the roof surface. The seam deforms slightly and the clamp block ma be slightly askew but will straighten out when you bolt the blocks to the snow rail itself. The number of clamps was too few in my opinion, and only one of the sliders provided was the proper shape to work with the clamping blocks and aluminum snow rail. To help you design a ColorGard system for your purposes, we invite you to use the ColorGard Calculator. These snow guards look like and probably are the painted cast aluminum RT SNow Guards produced by Berger Building Products[1]. This patented S-5! system uses a block that clamps to the standing seam of the roof and a clever flat aluminum slider intended to slide into a mounting groove on the snow guard rail. somewhere along its length. The names of their clamps are the following: A2 clamp, ML Clamp, Utility Block 2", Utility T Block 2", Brass Block, ASGU2 Standing Seam Clamps, Roof Clamp RCT, Roof Clamp RC, Sno Cube, Sno Cube Wide, Sno Cube Zip and Sno Cube KLOC. If the strip length is 8 feet, it may
S-5! patented, round-pointed setscrews grip the seam securely without penetration and without damage to the panel's protective finishes. At above left is a close-up of our green guide string installation. Unpunched ColorGard is the mostversatile and easy to install, when usedwith the S-5! The "dimple" in the splice piece will automatically provide a 1/8"
Maybe we can make something else out of this stuff but this bucket of parts and the aluminum rails were worthless as a snow brake until we obtain the proper clips from the manufacturer. ColorGard is the best buy on the market. 8655 Table Butte Road application method that can be warranted against color fade for 30
Measure along the first standing seam on one side of the roof, from eave up to the distance where the snow guard or rail or brake is to be installed. of the color strips should be overlapped about 1/2 inch. Always use the provided allen-driver bit that is included in the boxes with your S-5! ISBN-13: 978-0471331728, Building Pathology: Principles and Practice, David Watt, Wiley-Blackwell; 2 edition (March 7, 2008) Colorado Springs, CO 80908 Free to registered users. Plastic snow guards are sometimes chosen because they are assumed to be the lowest cost solution. clamp using a box-end wrench or ratchet. We have no relationship with advertisers, products, or services discussed at this website. (27 N.m.), Attach ColorGard to clamps
The manufacturer provides an allen screw adapter that can be driven by a 1/4" socket stepped to larger sizes to fit your torque wrench if necessary (photo at above right). SnoClip is added to retard the migration of snow and ice beneath the crossmembers. seam clamp installation with the top (mounting hole) on the upslope end of the clamp. The premium finishes used on todays metal roof products are
[8] Gough Snow Guards, Brookfield IL, Tel: 708-485-6272, Website: http://www.snoguard.com/ The company's products include copper snow guards installed on slate roofs and tile roofs, as well as standing seam metal roof snow retention systems.
It has a calculator that has been tried and tested by thousands of customers.That being said homeowners and contractors alike can rely on the information provided by the ColorGard Snow Guard Calculator. We will describe the mounting block position, proper location of its mounting screws, proper tightening torque, and connecting the block to the clamps and snow fence. In the photo above you see proper clamp and snow brake installation position though the photo may be confusing. have developed clamps and brackets to support solar and utility installations, along with a top-of-the-line snow retention system to support and protect your metal roof investment. from the same prefinished metal as the roof panels. lbs. A clamp will connect the actual snow fence to the top of the mounting block. Because we're testing glue-on snow-brakes on the lower eaves of this roof, the aluminum snow guard system was moved about ten feet up from those brakes. [7] Pacific Sheet Metal, [5] Alpine SnowGuards The item you are trying to purchase is currently out of stock.Please enter your name, email, and phone number below. To help you design a ColorGard system for your purposes, we invite you to use the ColorGard Calculator. also offers its Certified Engineer Stamp Program. tensioned and re-tensioned as the seam material compresses. when ColorGard is installed. Quality. Berger also provides clear plastic snow guards that can be adhered to the roof surface mechanically (via 4 pre-drilled screw holes) or by adhesive but as you'll read at SNOW GUARD GLUE ON INSTALLATION drilling holes in the roof is likely to lead to more than one sort of trouble. LEFT: Plastic snow guards at $26.63 per linear foot. soon begins to fade and becomes increasingly mismatched with a few
recommend using the Angle Driver (available at your S-5! distributor)
Is Design Assistance Available For ColorGard? Tension bolts to 20 ft.
Once satisfied with the clamp locations, using your screwgun, tighten the set screws. See the SnoClip brochure for more details. If you are installing un-punched ColorGard, plan your S-5! A properly designed, quality snow retention system can mitigate the danger and nuisance of sliding snow. Feasterville, PA 19053 RIGHT: S-5! ColorGard at $8.51 per linear foot. between intersecting rooflines. Byutilizing a strip of the actual roof material, ColorGard perfectly matches the roofforever ColorGard is mechanically attached with patented S-5! clamps. Refer to the, (And to make things even easier for you and your distributor, we now offer, Millennium Cyclone Low Pressure Pump Cart, Millennium Cyclone Low Pressure Pump Cart with V-Manifold, Commercial and Residential Roof Hatch and Access Hatches, Roof Truss Fall Protection and Bracket Scaffolds. Compare that with the taller multi-bar snow brakes and guards you see installed on older roofs. Some of the courses offered will meet the Health, Safety, and Welfare (HSW) requirements as well as the Green Building Certification Institute (GBCI) credits. To be clear, the problem was not with the design nor quality of the S-5! ColorGard is the only snow retention system designed and
Note that the calculator does not take into account rooftop snow abnormalities, please call Roof Things as to create an appropriate system. S-5 clamps are available to fit almost any seam. This is important as a too-loose clamp attachment risks loss of the snow brake system, damage to the roof, and damage to other building components from sliding snow and hardware. Englewood, CO 80110. Thanks Matt. Reynoldsburg, OH 43068 Email: info@rockymountainsnowguards.com, Rocky Mountain Snow Guards The product line (S5- Color Guard and S-5-N brackets) is high quality. SnoClip is an aluminum add-on that helps retard the migration of snow and ice beneath either the ColorGard crossmember, or the SnoRod of a SnoRail or SnoFence system. S-5! characteristics. The upper roof slope is to the right in this photo. We will contact you as soon as this product is available. Morrisville, VT 05661 Tel: 888-766-9994, Email: info@alpinesnowguards.com Website: http://www.alpinesnowguards.com/ [No direct retail sales], [6] ATAS Snow Retention Products, ATAS Headquarters Van Nostrand Reinhold Company, NY 1981 ISBN 0-442-2135-3 Library of Slide the color strip into the
These paint resins
clamp onto the standing roof seam. If you feel that you've received this message in error, please. Once the color strip is installed, crimp the corner of the ColorGard extrusion with pliers to keep the color strip from moving. ColorGard is the onlysnow retention system tobe warranted for the life ofthe roof. penetration and without damage to the panels protective finishes. user-friendly installationthis all equates to higher cost, right? Happily a call to the S-5! Sno-Guard manufacturer found immediate and expert advice, instructions on what parts we needed, their proper names, a referral to a supplier, and links to written and video installation instructions. Very easy to install. location if desired. Then there is the question of positioning the mounting block and the actual sliding Versa Clip clamp that connects the snow fence to the mounting block. Nothing can equal it. Roofing contractors find the ColorGard system so easy to work with, that they charge less to install it than they do for installing any, other competitive product on the market today! Durability, and strength are top notch. Snow accumulations on sloped metal roofs can pose significant danger to property and life. This is the best news of all! Sno Guard system were obtained from, Follow-up: Proper parts to install the S-5! The slotted configuration works well with S-5! clamps. ColorGard is mechanically attached with patented S-5! clamps. a 9/16" box-end wrench, or ratchet (lower left). It will straighten out
If the ColorGard assembly utilizes the VersaClip for attachment of the ColorGard crossmember, the bolt hole in the clamp should be at the upslope end of the clamp. seam clamp at each end of the roof area to be protected with ColorGard. ColorGard is a unique snow retention system. I have a standing seam. It simply comes down to the snow retention needs of the roofs. ColorGard dramatically reduces the risks associated with
Yes, ColorGard can be easily retrofitted to existing roofs, orincorporated into new construction design. Drywall guns may not deliver adequate tension. Slides on the ColorGard crossmembers. The good news is that there are tools out there to perform the system design and make comparison shopping much easieroften with surprising results regarding cost! divisible by 4 (10.2cm). Product is excellent as listed. between 130 and 150 inch pounds for all other metals and thinner gauges
Anderson, 1961 (hard to find), Corrugated Iron, Building on the Frontier, Simon Holloway. For seam heights of 1-3/4 (44.5 mm) up to 3 (76 mm). Using the S-5! Sno-Guard snow brake system involves fastening a mounting block onto a standing seam on a metal roof. We spoke with the occupants of this building in Poughkeepsie, New York about their experience with this installation. This product is of excellent quality. For a complete snow retention system, attache ColorGard to the metal standing roof panel using the S-5-B, S-5-E, S-5-H, S-5-H90, S-5-N, S-5-N1.5, S-5-Q, S-5-S, S-5-T, S-5-U, S-5-V and the S-5-Z roof clamp. Once designed, ColorGard is easy to install, requiring tools that are common to the trade. is the trusted name in metal rooftop attachment technology worldwide. from the roof can be dramatic, posing a serious threat to property and
and or what do I need to order? We provide step by step snow brake installation details and we describe some roof snow guard installation snafus that can occur if proper connectors, parts, or installation instructions are not obtained & followed. On larger jobs a 1/2" drive electric impact will
S-5 Clamps can be used on a huge variety of roofs (or similar styles) made by the following manufactures: With all these different roof panels ColorGuard snow guard can be attached to, that is something to say about the quality of the product. Joints in the ColorGard
This product has no reviews yet. Write a review! Not included. The Slate Roof Bible, Joseph Jenkins, www.jenkinsslate.com, DMI total system warranties protect all aspects of your metal envelope system, whether that be the watertightness of the roof or siding, the Galvalume steel, or the durable PVDF KYNAR finish. The S-5-S clamp is an extraordinarily versatile clamp. In searching for a solution, I found the S-5! Copyright var date = new Date(); document.write(date.getFullYear()) Roof Things LLC. S-5! All Rights Reserved. The mounting block is rotated so that the bolt hole that receives the Versa Clip mounting bolt in on the up-roof position. It is our pleasure to work with you to discover the best products for your project. Note: appearance of your Comment below may be delayed: if your comment contains an image, web link, or text that looks to the software as if it might be a web link, your posting will appear after it has been approved by a moderator. S-5!
ColorGard uses mechanical attachment rather than adhesives, installation canbe done any time of year, with no cleaning, no priming, no cure times, and no callbacks!
- Kodak Ultra Premium Photo Paper A4
- Encanto House Cardboard Cutout
- Anova Precision Vacuum Sealer Pro Video
- Secret Charcoal Deodorant
- Paula's Choice Wrinkle